15 Years Factory wholesale Nylon Tip Socket Set Screws to South Africa Manufacturer

At last! The long awaited and begged for video!
The cameraman himself, explaining to you how to build one of these majestic rigs to shoot those awesome smooth videos!
Please let me know if you have any questions, and we will try to answer! Good luck on making your own.
It wasn’t worth going through exactly how to make this one with all of the exact measurements, and so on because it’s more of a custom rig, built for your needs and for your camera. Basically, make everything as straight as possible and as precise and sturdy as possible, because this will help the glidecam work much better in the end. The stronger the materials you use the better.
I’m eager to see your success! Respond with videos of your own, I want to see how they turn out!

2015 UPDATE here: https://youtu.be/ItILEsDPWHg

Materials List (Minimal):

- Two sections of tripod leg (preferably the thicker two), with range from 10″-15″.
- 3″ piece of hollow tripod leg
- 12″x2″ piece of wood or metal for base plate.
- A rollerblade wheel w/bearings intact
- 3 more scooter/rollerblade bearings
- 6″ wooden dowel/pipe/scooter handle for gimble handle.
- 4 large fender washers (2.5″ wide)
- 4 smaller washers ( 1.75″ wide)
- 2 1″x0.5″x4″ pieces of wood
- 2 1″x0.5″X6″ piece of wood
- 1 0.5″x2″x5″ piece of wood
- 2 1.5″x0.25″x2″ pieces of wood
- 2 2.25″x0.5″x1″ pieces of wood
- 1 2.25″x0.5″x1″ piece of wood
- 1 2.5×0.375″x5″ piece of wood
- At least 16 0.5″ flat head screws.
- 4 1/4″x1″ carriage bolts
- 1 1.5″x1/4″ bolt
- 4 1/4″ wing nuts
- 2 1/4″ hex nuts
- Approximately 8″x3/8″ threaded rod.
- 3 3/8″ hex nuts + washers + split lock washers
- A piece of 1/16 sheet metal cut to about 1″x2″
Oh, and one 1/4 bolt that’s about an inch long, with a washer and wing nut, to attach the camera to the platform.

Sản xuất: TY REN,TY TREO,TY RĂNG,THANH REN, TY TREO mạ kẽm M6, M8, M10, M12, M16 — (High quality Galvanized Thread Rod) chiều dài 1m, 2m, 3m, đạt tiêu chuẩn JIS B 1051 — JAPAN & DIN 975 & DIN 976- Đức, Đai treo, Cùm treo, Đai treo hai mảnh (Pipe hanger/Conduit Clamp), tắc kê đạn, Đai treo Omega, cùm omega, Cùm Ubolt, Cùm Ubolt lá (U Bolts) Cùm treo ống, Kẹp treo ty & ống, Kẹp treo ống thép luồn dây điện, ống PCCC/ HVAC (Steel conduit hanger/Pipe hanger/Clevis Hanger), Kẹp xà gồ/ Kẹp dầm thép (Beam Clamp/Suspending Clamp/C-Clamp), Thanh chống đa năng (Unistrut Channel/ Strut/ C-Channel/ Double Unistrut profile ), Đai ốc lò xo cho thanh chống đa năng (Long spring nut), Tay đỡ đơn (Cantilever Arm), U cùm ( U bolts), Tắc kê đạn (Drop In Anchor), Đai treo (bát treo) cho hệ thống điện nhẹ M&E / HVAC/PCCC /Điều hoà không khí cho toà nhà cao tầng và nhà máy sản xuất công nghiệp tại Việt Nam. Cung cấp phụ kiện thi công xây dựng, phụ kiện điện nước, các loại bulong móng.
Liên hệ: Công ty TNHH Công Nghiệp Phụ Trợ Hùng Cường. Website:

https://thanhren.edu.vn/

https://cokhihungcuong.com/

https://bulongmong.com/

https://banvattu.vn/

https://daitreoong.com/

https://kepxago.edu.vn/

https://tyren.edu.vn/