Big Discount ASTM A449 Hex Cap Screws to Kazakhstan Importers

Big Discount
 ASTM A449 Hex Cap Screws to Kazakhstan Importers

Short Description:

ASTM A449 Hex Cap Screws Hex Bolts Standard: ASME B18.2.1 unless otherwise specified (Various types of configuration are also available) Thread Size: 1/4”-3” with various lengths Grade: ASTM A449 Type-1 Finish: Black Oxide, Zinc Plated, Dacromet, Hot Dip Galvanized, PTFE and so on Packing: Bulk about 25 kgs each carton, 36 cartons each pallet Advantage: High Quality and Strict Quality Control, Competitive Price,Timely Delivery; Technical Support, Supply Test Reports Please feel free to contac...


Product Detail

Product Tags

Our group through specialist training. Skilled expert knowledge, sturdy sense of assistance, to fulfill the provider needs of shoppers for Grub Screws Manufacturer , A193 B7M Stud Bolts , ASTM F1554 Bolts , Our final goal is "To try the best, To be the Best". Please feel free to contact with us if you have any requirements.
Big Discount ASTM A449 Hex Cap Screws to Kazakhstan Importers Detail:

ASTM A449 Hex Cap Screws Hex Bolts

Standard: ASME B18.2.1 unless otherwise specified

(Various types of configuration are also available)

Thread Size: 1/4”-3” with various lengths

Grade: ASTM A449 Type-1

Finish: Black Oxide, Zinc Plated, Dacromet, Hot Dip Galvanized, PTFE and so on

Packing: Bulk about 25 kgs each carton, 36 cartons each pallet

Advantage: High Quality and Strict Quality Control, Competitive Price,Timely Delivery; Technical Support, Supply Test Reports

Please feel free to contact us for more details.


Product detail pictures:

Big Discount
 ASTM A449 Hex Cap Screws to Kazakhstan Importers detail pictures


Our team through qualified training. Skilled professional knowledge, powerful sense of support, to satisfy the support desires of consumers for Big Discount ASTM A449 Hex Cap Screws to Kazakhstan Importers, The product will supply to all over the world, such as: Vatican City(Holy See) , Dominica , Guatemala , Besides there are also professional production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our best to reduce customer purchase cost, shorten the period of purchase, stable products quality, increase customers' satisfaction and achieve win-win situation .



  • How to replace the shaft seal on a KM pump

    00:13 Step1. Remove the bearing cap
    00:23 Step2. Remove the grease
    00:29 Step3. Remove the lock washer and the shaft nut
    00:57 Step4. Remove the bearing housing
    01:50 Step5. Remove the retainer ring
    02:12 Step6. Remove the used shaft seal
    02.29 Step7. Mount the new shaft seal
    02:42 Step8. Clean the sealing surface carefully
    02:50 Step9. Mount the carbon ring in the container ring
    03:02 Step10. Clean the sealing surface of the carbon ring
    03:07 Step11. Mount the retainer
    03:34 Step12. Remove the rear cap and the bearing from the bearing housing
    03:52 Step13. Mount the rear cap again loosely
    03:59 Step14. Mount the bearing housing
    04:45 Step15. Mount the bearing
    05:09 Step16. Mount the shaft nut and the lock washer
    05:25 Step17. Mount the bearing cap loosely
    How to line up the rotor
    05:38 Step1. Make sure that the four bolts in the front bearing cap are tighten
    05:43 Step2. Place a precision clock on the shaft
    05:58 Step3. Force the rotor back until it makes contact with the rear flow plate
    Now the rotor has contact with the flow plate and cannot be turned by hand
    06:24 Step4. Loosen the bearing cap again
    06:43 Step5. Reset the clock (O)
    06:59 Step6. Force the rotor forward until it makes contact with the front flow plate
    07:13 Step7. Make sure that the rotor has contact with the front flow plate
    07:18 Step8. Note the rotors total moving space
    In the case 0.36 mm
    07:41 Step9. Move the rotor back again and ensure the equal space in both ends of the rotor
    In this case 0.36mm/2=0.18mm
    08:12 Step10. Lock the bear bearing by tightening the flour bolts
    The rotor is now centered and locked
    08:31 Step11. Check that the rotor is running free
    08:42 Step12. Grease the pump according to the manual

    For more information please visit: http://www.samson-pumps.com



    Bruce Tyler of IBM & Fawad Butt of Kaiser Permanente sit down with hosts Jeff Frick & Peter Burris at the IBM Chief Data Officer Strategy Summit (Spring) in San Francisco, CA.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    WhatsApp Online Chat !