Big discounting ASTM A325 Heavy Hex Structural Bolts to Sudan Factory
ASTM A325 Heavy Hex Structural Bolts The bolts are intended for use in structural connections. These connections are covered under the requirements of the Specification for Structural Joints Using ASTM A325 Bolts, approved by the Research Council on Structural Connections, endorsed by the American Institute of Steel Construction and by the Industrial Fastener Institute. Dimension: ASME B18.2.6 Thread Size: 1/2″-1.1/2″ with various lengths Grade: ASTM A325 Type-1 Finish: Black Ox...
Big discounting ASTM A325 Heavy Hex Structural Bolts to Sudan Factory Detail:
ASTM A325 Heavy Hex Structural Bolts
The bolts are intended for use in structural connections. These connections are covered under the requirements of the Specification for Structural Joints Using ASTM A325 Bolts, approved by the Research Council on Structural Connections, endorsed by the American Institute of Steel Construction and by the Industrial Fastener Institute.
Dimension: ASME B18.2.6
Thread Size: 1/2″-1.1/2″ with various lengths
Grade: ASTM A325 Type-1
Finish: Black Oxide, Zinc Plating, Hot Dip Galvanized, Dacromet, and so on
Packing: Bulk about 25 kgs each carton, 36 cartons each pallet
Advantage: High Quality and Strict Quality Control, Competitive price,Timely delivery; Technical support, Supply Test Reports
Please feel free to contact us for more details.
Product detail pictures:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of employees building, striving hard to boost the standard and liability consciousness of staff members. Our corporation successfully attained IS9001 Certification and European CE Certification of Big discounting ASTM A325 Heavy Hex Structural Bolts to Sudan Factory, The product will supply to all over the world, such as: Ecuador , Lisbon , Portland , Due to our dedication, our products are well known throughout the world and our export volume continuously grows every year. We will continue to strive for excellence by providing high quality products that will exceed the expectation of our customers.
Here is how to install or refit the seat bolts on a Harley Davidson so you can get back behind the bars and into top gear and down the road. In this video we use a Harley Davidson Fatboy, but the procedure can be transferred to other models in the H-D range including Heritage, Deluxe, Softail, Fatbob, Low-Rider, Sporters as well as most touring models.
The Softail Manual reads:
The pillion seat attaches with a single screw at the rear and engages to the drivers’ seat mounting screw at the front.
To remove seat, first remove passenger seat buy unscrewing the rear retaining screwing and sliding the seat towards the rear of the bike to remove the locating slots from the front seat mounting fasteners. Next remove the front seat mounting fasteners and slide the seat rearwards to free the tang at the front of the seat. When installing the seat, insert the tang at front of seat into the channel in the frame and install seat-mounting nuts. Install passenger seat.
An Important Note: After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury.
The rear-retaining nut is held in position with a sliding retention washer.
If the retention washer is removed, the retention nut will fall through the fender. The procedure below is used to lift the retention nut up through the fender and back in position, with either a piece of wire or on a cable tie for ease of replacement.
Slide retention nut over the tapered end of a cable tie so that the larger O.D. of nut rests on the cable tie strap eyelet or if using a piece of wire bend the bottom end of the wire to prevent the nut from falling off.
Feed the cable tie or wire up through fender hole.
Ensure the tab on the retention nut is located in the notched hole on the fender. When the nut is snug against the underside of the rear fender slide the retention washer on the nut from the opposite side the of the nut’s locking tab.
For more information visit www.gonetouring.com.au
In this video, one of our resident fastener specialists talks about all the varieties of nuts we have presently. They then proceed to describe each nut type and its purpose and function.
For demonstrations of these nuts in use, please refer to that nut’s respective specialized video. A few will be linked below and in this video:
Keps Lock Nuts: https://youtu.be/KUYss0oSDrQ
Castle Nuts: https://youtu.be/5DqM0RNLQZ8
Waxed Nylon Lock Nuts: https://youtu.be/0K_MdHmWGOA
For a complete list of all the nuts shown in the video, visit the following link: https://www.albanycountyfasteners.com/Nuts-s/279.htm
For all your other fastener needs, please visit us: https://www.albanycountyfasteners.com
For more Fasteners 101 information, please visit our website here: http://www.albanycountyfasteners.com/Fastener-Education-and-Information-s/1128.htm