Hot Selling for ASTM A194 4 Heavy Hex Nuts Wholesale to Iran
Short Description:
ASTM A194/A194M 4 Heavy Hex Nuts API 6A Flange Valve Wellhead Heavy Hex Nuts Dimension Standard: ASME B18.2.2, ASME B18.2.4.6M, ISO 4033, Din934 H=D Inch Size: 1/4”-4” with various lengths Metric Size: M6-M100 with various lengths Other Available Grade: ASTM A194/A194M 2H, 2HM, 4, 4L, 7, 7L, 7M, 8, 8M, 16 and so on. Finish: Plain, Black Oxide, Zinc Plated, Zinc Nickel Plated, Cadmium Plated, PTFE etc. Packing: Bulk about 25 kgs each carton, 36 cartons each pallet Advantage: High Quality, Comp...
Product Detail
Product Tags
Hot Selling for ASTM A194 4 Heavy Hex Nuts Wholesale to Iran Detail:
ASTM A194/A194M 4 Heavy Hex Nuts
API 6A Flange Valve Wellhead Heavy Hex Nuts
Dimension Standard: ASME B18.2.2, ASME B18.2.4.6M, ISO 4033, Din934 H=D
Inch Size: 1/4”-4” with various lengths
Metric Size: M6-M100 with various lengths
Other Available Grade:
ASTM A194/A194M 2H, 2HM, 4, 4L, 7, 7L, 7M, 8, 8M, 16 and so on.
Finish: Plain, Black Oxide, Zinc Plated, Zinc Nickel Plated, Cadmium Plated, PTFE etc.
Packing: Bulk about 25 kgs each carton, 36 cartons each pallet
Advantage: High Quality, Competitive Price, Timely Delivery,Technical Support, Supply Test Reports
Please feel free to contact us for more details.
Product detail pictures:
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for Hot Selling for ASTM A194 4 Heavy Hex Nuts Wholesale to Iran, The product will supply to all over the world, such as: Australia, Hanover, Adelaide, We guarantee that our company will try our best to reduce customer purchase cost , shorten the period of purchase , stable products quality , increase customers' satisfaction and achieve win-win situation .
Fiam designed and manufactured a new solution to process two different types of stud bolt: symmetric and asymmetric, threaded elements diffused mainly in the automotive sector (engine assembly, alternator, air conditioners and mechanical components in general).
Scope of solution:
2 Circular feeders customized on the type of stud bolt; they assure high supply and capacity without using hoppers
2 Linear feeders customized to convey the stud bolts
2 Stud bolt selectors:
The system to process asymmetric stud bolts is equipped with a camera that detects the direction of the stud and a special rotating device that oriented the stud in the right direction before conveying it to the nosepiece for the automatic
tightening.
A single stroke fastening slide with:
- Special analog transducer recognizing different fastening depth according to the type of stud and the workpiece to be processed
- Air nutrunner motor with air shut off that ensures the assembly to 4 Nm torque
- Special screw head that can receive and hold both types of stud bolts
Earlier video indicating the issue – https://www.youtube.com/watch?v=Tz02UNj0pkM
The cutoff shield/metal plate was rubbing against the bent plate and was not getting pulled down when the solenoid was energized. We used a needle nose plier to pull the bent plate off a little bit and now the plate does not rub. Works fine. We used a 9V battery + 2 AAA 1.5V Duracells since the 9V battery was almost dead! If you have this issue, take care while using the pliers not to damage the solenoid assembly while pulling the bent plate.
This mechanism clearly needs an improvement from the Morimoto guys. The pivoting point of the plate at the right side has a small lateral (forward-aft) movement which has to be restricted. If this is done, the plate will not move back and forth but only top and bottom. Another improvement that can be done is to have the solenoid connector facing the rear instead of the front. Not sure why it was designed this way. Instead of rivets, screws can be used to hold the lens to the projector cast casing. The high-end FX-R and the low-end Mini H1 have screws! Only the Mini D2S has rivets.
