ASTM A325 Teški Hex Strukturni Vijci
ASTM A325 / A325M Heavy Hex Structural Bolts The bolts are intended for use in structural connections. These connections are covered under the requirements of the Specification for Structural Joints Using ASTM A325 Bolts, approved by the Research Council on Structural Connections, endorsed by the American Institute of Steel Construction and by the Industrial Fastener Institute. Dimension: ASME B18.2.6 (Inch Size), ASME B126.96.36.199M (Metric Size) Thread Size: 1/2″-1.1/2″, M12-M36, ...
Pojedinosti o proizvodu
ASTM A325 / A325M Heavy Hex Structural Bolts
Vijci su namijenjeni za uporabu u strukturnim vezama. Te veze su pokriveni zahtjevima specifikacija za strukturne fuge pomoću ASTM A325 vijci, odobrenog od strane Vijeća za istraživanje na strukturne veze, potvrdio je američki Institut za čelične konstrukcije i industrijske Učvršćivač Instituta.
Dimension: ASME B18.2.6 (Inch Size), ASME B188.8.131.52M (Metric Size)
Thread Size: 1/2″-1.1/2″, M12-M36, with various lengths
Grade: ASTM A325 / A325M Type-1
Završetak: Crna oksid, cink galvaniziranje, Vruće pocinčani, Dacromet, i tako dalje
Pakiranje: Bulk oko 25 kg svaki, karton 36 kartone svaki paleta
Prednost: Visoka kvaliteta i kontrolu kvalitete, konkurentne cijene, pravovremene isporuke; Tehnička podrška, Opskrba izvješća o ispitivanju
Slobodno nas kontaktirajte za više detalja.
In 2016, ASTM A325 was officially withdrawn and replaced by ASTM F3125, in which A325 now becomes a grade under the F3125 specification. The F3125 specification is a consolidation and replacement of six ASTM standards, including; A325, A325M, A490, A490M, F1852, and F2280.
Prior to its withdrawl in 2016, the ASTM A325 specification covered high strength heavy hex structural bolts from 1/2″ diameter through 1-1/2″ diameter. These bolts are intended for use in structural connections and therefore have shorter thread lengths than standard hex bolts.
This specification is applicable to heavy hex structural bolts only. For bolts of other configurations and thread lengths with similar mechanical properties, see Specification A449.
Bolts for general applications, including anchor bolts, are covered by Specification A449. Also refer to Specification A449 for quenched and tempered steel bolts and studs with diameters greater than 1-1/2″ but with similar mechanical properties.