New Delivery for A2-70 A4-70 ASTM F593 Stainless Steel Hex Bolts Supply to Angola

Departmental Procedures & Guidelines for Inspections, Certifications, Load Testing, Repairs & Painting of Fire Escapes
Inspections by Structural Engineers, Fire Escape Engineers or others acceptable to the Official:
In layman’s terms, the city official is looking for a registered structural engineer or others qualified and acceptable by the Fire/Code Official to do a Critical Examination in lieu of a Live Load Test (criteria submitted or discussed prior to inspection) and issues written verification and certification that all connections are free of internal rust or rot as well as all original hardware (square head bolts or rivet) are reinforced and or replaced in lieu of Live Load Test. All supports (thru-bolts or cemented) into the wall must be verified and certified in lieu of Live Load Test. A fire escape confidence test and tag must be submitted if fire escape passed. The report with photos identifying violations for repairs must include repair criteria submitted to the official for repair vendor to use as a guide during and with engineer oversight of permitted repairs. A Fire Escape Confidence Test and tags identifying certified condition are then submitted. Recommended cycle for live load testing is 20 yrs after total refurbishment or as required by official.

Repairs by Ornamental Ironworkers, Welding Companies or others acceptable to the Official:

In layman’s terms, the city official is looking for a qualified licensed repair vendor to do all work under repair permit (if required) with engineer oversight of repair criteria submitted for approval to the official in lieu of Live Load Test. All connections must be free of internal rust or rot, spot primed and sealed. All worn material repaired and or replaced. All supports into wall reinforced, repaired and certified in a Fire Escape Confidence Test. In lieu of Live Load Test, all square head bolts, rivets and or welded connections must be certified, reinforced and or replaced based on age or condition. All ladders and cantilevers must be balanced and drop 2-3 ft per second, hit the ground and stay down and must lead to a public way. All roof ladders must be secure. No full painting of any fire escape until all spot painted repairs are inspected and certified under engineer oversight and or city official permit sign-off. Full replacement is subject to permits and or possible code upgrade requirements.
Painting by EPA Licensed Renovators (if lead paint is present) or others acceptable to Official:
In layman’s terms, the city official is looking for a paint vendor (EPA Certified Renovator if required) to do all work as per EPA Guidelines due to the fact that all fire escapes older than 1978 are presumed to have lead (EPA) unless identified as no lead or low lead by a licensed lead inspector. Entire building will be notified with signage and all precautions shall be taken to collect paint chips at grade. No sandblasting or power assisted scraping without full fire escape encapsulation under EPA Guidelines. All major connection shall be sealed from water intrusion before during or after painting. All escapes should be spot painted every 3-5 yrs and fully painted every 5-10 yrs or as needed or ordered by a Fire/Code Official.

For more information please visit our website at https://fireescapeengineers.com or call 866-649-0333
Fire Escape Engineers is an approved member of the Fire Escape Services Network https://www.fireescpeservices.com and a founding member of the National Fire Escape Association (NFEA) https://www.nationalfireescapeassociation.org

websites:https://www.minjiesteel.com/

We are a professional manufacture and exporter for steel prodcuts. The main products are pre galvanized steel pipe, hot dip galvanized pipe,welded steel pipe, square&rectangular tube and scaffolding products. Our manufacturing equipment include 4 pre galvanized product lines, 8 ERW steel pipe product lines, 3 hot-dipped galvanized process lines. According to the standard of GB,ASTM,DIN,JIS. The products are under the ISO9001 quality certification manage mode. Annual output of various pipe is more than 300 thousands tons, covering the range of 21.3-457mm round pipe,15*15-500*500mm square tube,15*20-500*100mm rectangular tube, , with thickness of 0.8-30mm.

Email: info@minjiesteel.com websites:https://www.minjiesteel.com/

We are a professional manufacture and exporter for steel prodcuts. The main products are pre galvanized steel pipe, hot dip galvanized pipe,welded steel pipe, square&rectangular tube and scaffolding products. Our manufacturing equipment include 4 pre galvanized product lines, 8 ERW steel pipe product lines, 3 hot-dipped galvanized process lines. According to the standard of GB,ASTM,DIN,JIS. The products are under the ISO9001 quality certification manage mode. Annual output of various pipe is more than 300 thousands tons, covering the range of 21.3-457mm round pipe,15*15-500*500mm square tube,15*20-500*100mm rectangular tube, , with thickness of 0.8-30mm.

Email: info@minjiesteel.com