professional factory provide ASTM F912 F912M Alloy Steel Socket Set Screws to Libya Importers

When I went to Niagara with 5FootChina we ran into this dude in the same abandoned gas station, so I asked if it was ok to put it on YouTube.

*INFO*

-Renthal full diamond medium grey grips (glued and wired on)
-Renthal Twinwall bars CR high bend
-Renthal bar pad
-Renthal intelilevers
-Protaper aluminum roller bering throttle tube
-OEM replacement off button
-Protaper 1-1/8th universal bar clamps
-Zeta blue aluminum steering stem nut
-Solid bar mount bushings
-New clutch and throttle cable
-Zeta master cylinder cover (blue)
-Stock 2000 kx250 triple trees with welded tabs to accept 2011 numberplate
-2011 kx450f front fender and number plate
-Forks rebuilt with OEM bushings and seals (7.5 weight Belray fork oil)
-Shock sox 6” black
-Factory front rim and hub (rim is coated in premium black Line-X hub is powder coated)
-Polished OEM stainless steel spoked and aluminum nipples
-Dunlop MX-51 tires front and back (with yellow lettering)
-Core racing blue stainless steel brake lines
-Zeta front brake line clamp
-2011 OEM front brake line guide (plastic was white, but its dyed black now)
-Rebuilt factory fuel petcock
-Factory gas tank covered in DEI heat tape
-Motion pro blue plastic rim lock front and back
-RCI valve stem rubber seal
-Ebay 2” aluminum radiators with new OEM bushings And Ebay silicon hose kit
-Black 2000 fork guards with custom KAWASAKI logo
-Wrinkle black powder coated frame and swing arm
-2003 kx250 rear swing arm hub and axel swap (gives you a 25mm axel and bigger rotor)
-Powder coated axel ends
-New OEM factory seat stock height
-New OEM factory air box
-Renthal 14 tooth front sprocket and rental light weight aluminium 52 tooth rear sprocket
-D.I.D vt O ring gold enduro racing chain with removable aftermarket master link
-2007 Kx250f tank shrouds (cut to fit with custom brackets)
-Powerseal USA did the top end
-Wiseco pro lite foraged aluminum flat top piston (stock bore 66.8)
-Polished and revised power valve gears
-Ported intake fins and chambers
-Polished exhaust port
-Powder coated water pump cover
-Polished and sharpened factory water pump prop
-Decked head
-Wiseco topend gasket set
-Vforce 3 carbon fiber reeds
-New OEM intake boot
-Powder coated power valve covers
-Stock cleaned up bottom end (it was running when I took it apart)
-Sunline shifter powder coated black
-Welded and powder coated kick start
-Moose racing exhaust springs
-FMF Gnarly pipe (nickel plated)
-Procircuit R-304 shorty silencer
-Every bering on the bike is brand new
-New OEM dog bones
-New OEM linkage bolts and nuts
-Stator and clutch covers are stock but coated in premium Line-X
-Rear wheel is stock but coated in Line-X
-EBC brake pads
-Decked rotors
-Acerbis Black mud flap
-FX rear axel blocks
-32mm self locking axel nut
-NGK BR8EXI spark plug
-NGK waterproof spark plug cap
-Trail tech mini hour meter (tucked under seat)
-Revised and wire wrapped factory wiring harness
-Every bolt and nut is either new or polished to showroom condition
-Zeta blue aluminum tank washer
-Braced and completely re welded frame and sub frame and swing arm
-Polisport chain slider and guide
-Polisport rear fender and side panels (2000 kx250 stock)
-New OEM rebuilt factory rear shock (200lbs nitrogen)
-Powder coated black OEM rear shock spring
-New OEM powder coated factory foot pegs and pins
-Twin air air filter
-Engine Ice coolant
-Royal purple synchromax gearbox oil
-New OEM frame guards
-Moose racing ball bering chain rollers
-Ebay green carb overflow lines
-New OEM clutch pack and smoothed factory basket
-Stainless steel hose clamps

Music video by Hannah Montana performing The Best Of Both Worlds. (P) 2006 The copyright in this audiovisual recording is owned by Walt Disney Records under exclusive licence to EMI Records Ltd