ASTM A325 Heavy Hex Structural Bolts
ASTM A325 / A325M Heavy Hex Structural Bolts The bolts are intended for use in structural connections. These connections are covered under the requirements of the Specification for Structural Joints Using ASTM A325 Bolts, approved by the Research Council on Structural Connections, endorsed by the American Institute of Steel Construction and by the Industrial Fastener Institute. Dimension: ASME B18.2.6 (Inch Size), ASME B220.127.116.11M (Metric Size) Thread Size: 1/2″-1.1/2″, M12-M36, ...
Detalye ng Produkto
produkto Mga Tag
ASTM A325 / A325M Heavy Hex Structural Bolts
Ang bolts ay inilaan para sa paggamit sa istruktura koneksyon. Ang mga koneksyon ay sakop sa ilalim ng mga iniaatas ng mga Specification para sa Structural Joints Paggamit ng ASTM A325 Bolts, inaprubahan ng ang Research Council on Structural Connections, inindorso ng American Institute of Steel Construction at ng Industrial Fastener Institute.
Dimension: ASME B18.2.6 (Inch Size), ASME B18.104.22.168M (Metric Size)
Thread Size: 1/2″-1.1/2″, M12-M36, with various lengths
Grade: ASTM A325 / A325M Type-1
Tapos na: Black oksido, sink kalupkop, mainit lumangoy galvanized, Dacromet, at iba pa
Packing: Bulk halos 25 kgs bawat karton, 36 mga karton sa bawat pallet
Advantage: Mataas na Kalidad at Strict Quality Control, Competitive presyo, napapanahong paghahatid; Teknikal na suporta, Supply Test Ulat
Mangyaring huwag mag-atubiling makipag-ugnay sa amin para sa karagdagang detalye.
In 2016, ASTM A325 was officially withdrawn and replaced by ASTM F3125, in which A325 now becomes a grade under the F3125 specification. The F3125 specification is a consolidation and replacement of six ASTM standards, including; A325, A325M, A490, A490M, F1852, and F2280.
Prior to its withdrawl in 2016, the ASTM A325 specification covered high strength heavy hex structural bolts from 1/2″ diameter through 1-1/2″ diameter. These bolts are intended for use in structural connections and therefore have shorter thread lengths than standard hex bolts.
This specification is applicable to heavy hex structural bolts only. For bolts of other configurations and thread lengths with similar mechanical properties, see Specification A449.
Bolts for general applications, including anchor bolts, are covered by Specification A449. Also refer to Specification A449 for quenched and tempered steel bolts and studs with diameters greater than 1-1/2″ but with similar mechanical properties.