Trending Products BS4395 High strength friction grip bolts with Nuts and Washers for Jamaica Manufacturer

Trending Products 
 BS4395 High strength friction grip bolts with Nuts and Washers for Jamaica Manufacturer

Short Description:

BS4395 High Strength Friction Grip Bolts with Nuts and Washers Dimension: BS4395 Thread Size: M12-M36 with various length Grade: BS4395 Part-1 8.8, BS4395 Part-2 10.9 Finish: Black Oxide, Zinc Plating, Hot Dip Galvanized, Dacromet, and so on Packing: Bulk about 25 kgs each carton, 36 cartons each pallet Advantage: High Quality and Strict Quality Control, Competitive price,Timely delivery; Technical support, Supply Test Reports Please feel free to contact us for more details.


Product Detail

Product Tags

We are experienced manufacturer. Wining the majority from the crucial certifications of its market for A320 L7 Stud Bolts , Hardened Steel Washers , Tower Bolts , Trust us and you'll gain far more. Be sure to really feel free of charge to contact us for additional details, we assure you of our best attention at all times.
Trending Products BS4395 High strength friction grip bolts with Nuts and Washers for Jamaica Manufacturer Detail:

BS4395 High Strength Friction Grip Bolts with Nuts and Washers

Dimension: BS4395

Thread Size: M12-M36 with various length

Grade: BS4395 Part-1 8.8, BS4395 Part-2 10.9

Finish: Black Oxide, Zinc Plating, Hot Dip Galvanized, Dacromet, and so on

Packing: Bulk about 25 kgs each carton, 36 cartons each pallet

Advantage: High Quality and Strict Quality Control, Competitive price,Timely delivery; Technical support, Supply Test Reports

Please feel free to contact us for more details.


Product detail pictures:

Trending Products 
 BS4395 High strength friction grip bolts with Nuts and Washers for Jamaica Manufacturer detail pictures


We strive for excellence, service the customers", hopes to become the best cooperation team and dominator enterprise for personnel, suppliers and customers, realizes value share and continuous promotion for Trending Products BS4395 High strength friction grip bolts with Nuts and Washers for Jamaica Manufacturer, The product will supply to all over the world, such as: Suriname , Grenada , Mauritius , Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!



  • Product page: http://mishimo.to/1Vy7EjF
    Facebook: http://www.facebook.com/GoMishimoto
    Twitter: http://www.Twitter.com/Mishimoto
    Instagram: http://www.Instagram.com/Mishimoto

    Mishimoto proudly announces the all-new Nissan 370Z, 2009+ / Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto oil cooler is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Nissan 370Z/Infiniti G37 Oil Cooler Kit comes with a Lifetime Warranty, so you know quality is guaranteed!

    Model Number: MMOC-370Z-09

    Mishimoto 370Z Oil Cooler Kit Installation Instructions

    PARTS LIST
    3PC | Application Specific Mounting Brackets
    1PC | 19 Row Oil Cooler
    1PC | 4ft Stainless Steel Braided Hose w/-10AN Fittings
    1PC | 5ft Stainless Steel Braided Hose w/-10AN Fittings
    1PC | Oil Sandwich Plate M20, Silver
    1PC | Stainless Steel Sandwich Plate Adapter, M20
    2PC | Banjo Fitting w/ Bolt M20 x -10AN, Black
    1PC | Mounting Hardware Set

    TOOLS NEEDED
    Jack & Jack Stands
    Socket Wrench
    Socket Extensions
    Screwdriver
    27mm Socket
    10mm Socket and/or Wrench
    Panel Tool
    Teflon Tape
    5mm Hex Key
    Oil

    Disclaimer
    • Please dispose of any liquids properly.
    • Allow vehicle to cool completely prior to attempting installation.
    • Mishimoto Performance is not responsible for any vehicle damage
    or personal injury due to installation errors, misuse, or removal of
    MP products.
    • MP always suggests that a trained professional install all MP products.
    • Do not run the engine or drive the vehicle while overheating. Serious
    damage may occur.
    • Raise vehicle only on jack stands or on a vehicle lift.
    • See specific instructions regarding sandwich plate installation on last page.
    Note: Oil cooler systems must be checked for leaks during each
    oil change.

    INSTALLATION INSTRUCTIONS
    01 | Preparing the vehicle for installation
    1. Raise vehicle and support on jack stands.
    2. Remove plastic clips and 10mm screws. Remove splash shield.
    3. Remove bumper clips (pop clips).
    4. Remove 10mm bolt from inner splash shield panel (both sides).
    5. Remove front bumper.

    02 | Preparing the Mishimoto oil cooler
    kit for installation
    1. Wrap plug in Teflon tape and insert into sandwich plate.
    2. Install O-ring seal on sandwich plate.
    3. Assemble and install banjo fittings to sandwich plate. Be sure that a
    seal is on the top and bottom of the fitting.
    4. Locate appropriate adaptor (no hash marks).
    5. Remove oil filter and install sandwich plate to oil filter housing.
    Next, install appropriate adaptor in center of the sandwich plate.
    Tighten the adaptor in hold sandwich plate in place (27mm socket).
    Lastly, tighten the banjo fittings using the same 27mm socket.
    6. Attach Mishimoto lower bracket to oil cooler using 10mm bolts.
    7. Attach Mishimoto upper bracket to oil cooler using 10mm bolts.
    Leave loose until installation is complete.
    8. Install threaded lines to oil cooler. Leave loose until installation is
    complete.

    03 | Installing Mishimoto oil cooler
    1. Install threaded clips on vehicle.
    2. Install oil cooler and bolt in brackets using the 10mm bolts.
    Then, tighten upper bracket hardware and threaded lines.
    3. Stainless oil lines will follow P/S lines over metal support beam.
    4. Connect lines to banjo fittings.
    5. Install new oil filter.
    6. Start vehicle and check for leaks. Be sure to check oil levels and add
    oil if necessary.
    7. Reinstall front bumper with OEM pop clips and screws.

    SANDWICH PLATE
    01 | ASSEMBLING 1/8” NPT PLUGS
    1. Inspect components to ensure that male and female port threads
    and sealing surfaces are clean and dry and free of burrs, nicks, and
    scratches, and/or foreign material.
    2. Apply Teflon® tape (or sealant) 1.5-2 full turns in clockwise
    direction when viewed from the pipe-thread end. Leave the first two
    threads without any Teflon® to avoid contamination.
    3. Screw plug into port until it is “finger tight.”
    4. Wrench tighten the plug 2-3 full turns. (1/8”npt only)
    5. Remove any excess Teflon® after tightening.
    6. Notice that no Teflon® tape is inside the npt port area.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    WhatsApp Online Chat !