Wholesale Discount ASME B18.21.1 Lock Washer to Mongolia Manufacturers

Wholesale Discount
  ASME B18.21.1 Lock Washer to Mongolia Manufacturers

Short Description:

ASME B18.21.1 Spring Lock Washers Tooth Lock Washers Dimension: ANSI B18.21.1 Various Material Steel and Grade are available. Finish: Black Oxide, Zinc Plated, Hot Dip Galvanized, Dacromet, and so on Packing: Bulk about 25 kgs each carton, 36 cartons each pallet Advantage: High Quality and Strict Quality Control, Competitive price,Timely delivery; Technical support, Supply Test Reports Please feel free to contact us for more details.


Product Detail

Product Tags

We insist over the principle of enhancement of 'High high quality, Efficiency, Sincerity and Down-to-earth working approach' to offer you with superb assistance of processing for A320 L7 Stud Bolts , Track Shoe Bolts , Socket Set Screws , To improved expand market, we sincerely invite ambitious individuals and providers to hitch as an agent.
Wholesale Discount ASME B18.21.1 Lock Washer to Mongolia Manufacturers Detail:

ASME B18.21.1 Spring Lock Washers Tooth Lock Washers

Dimension: ANSI B18.21.1

Various Material Steel and Grade are available.

Finish: Black Oxide, Zinc Plated, Hot Dip Galvanized, Dacromet, and so on

Packing: Bulk about 25 kgs each carton, 36 cartons each pallet

Advantage: High Quality and Strict Quality Control, Competitive price,Timely delivery; Technical support, Supply Test Reports

Please feel free to contact us for more details.


Product detail pictures:

Wholesale Discount
  ASME B18.21.1 Lock Washer to Mongolia Manufacturers detail pictures

Wholesale Discount
  ASME B18.21.1 Lock Washer to Mongolia Manufacturers detail pictures


We are also focusing on improving the stuff management and QC system so that we could keep great advantage in the fiercely-competitive business for Wholesale Discount ASME B18.21.1 Lock Washer to Mongolia Manufacturers, The product will supply to all over the world, such as: Somalia , Rwanda , Aruba , Our market share of our products and solutions has greatly increased yearly. If you are interested in any of our products or would like to discuss a custom order, make sure you feel free to contact us. We've been looking forward to forming successful business relationships with new clients around the world in the near future. We've been looking forward to your inquiry and order.



  • Machining A Replacement Pulley With A Keyway, by Clickspring.

    In this video, I machine a replacement pulley for my 1″ Delta belt sander. This is a perfect mini lathe project, with some interesting turning between centers, as well as the formation of a keyway using the lathe as a manual shaper.

    Be sure to use breathing protection whenever using heat to break a super glue bond.

    You can download the dimensioned drawing for this particular pulley for free from the Clickspring website:

    Metric: http://www.clickspringprojects.com/uploads/3/8/2/2/38221101/pulley_metric.pdf
    Inch: http://www.clickspringprojects.com/uploads/3/8/2/2/38221101/pulley_inch.pdf

    Thanks for watching. If you enjoyed the video please give a thumbs up, and leave me a comment.

    If you would like to help support the creation of these video’s, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring

    For more info on this build, as well as other tool making info and plans, visit http://www.clickspringprojects.com

    Other Videos to Watch:

    How To Make A Clock In The Home Machine Shop – Part 4 – Cutting The Wheels

    How To Make A Clock In The Home Machine Shop – Part 5 – Cutting The Pinions

    Ask Me A Question:

    http://www.clickspringprojects.com/contact.html

    Follow Clickspring:

    https://www.patreon.com/clickspring

    http://www.facebook.com/Clickspring1

    http://plus.google.com/u/0/113668471124073837794/posts

    http://instagram.com/clickspring1/

    https://www.tumblr.com/blog/clickspring1

    https://www.pinterest.com/clickspring1

    Language Credits:
    Portuguese subtitles courtesy of Emanuel Mendes

    Transcript:

    00:50 The second is the v-groove for the belt. It’s has a 30 degree included angle, and not very deep, so I’ll form that with the lathe compound. And lastly, there’s the set screw hole, which I’ll do on the mill. If you’d like to know the dimensions, I’ve put a link to some free drawings in the description box below.
    01:07 These are the materials I’ll be using for the job. I’ve got this excellent little piece of aluminium that’s a left over from another project, although it’s a bit too short for chucking, so I’m going to turn it between centers to form the features. So that means I need an arbor, and I’ve have this nice length of silver steel for that.
    01:40 The arbor needs centers on each end, so I set it to run true in a 4 jaw chuck, and then faced and center drilled the ends. Next I drilled and then reamed the slug of aluminium to match the outside diameter of the arbor.
    02:35 The work is a nice close fit on the arbor, so a small amount of the glue is enough to hold it firmly in place for the rest of the job provided I don’t let the heat from the cutting, build up too much. I formed a temporary center from some hex stock, and then set up the lathe for turning between centers.
    03:46 Next I formed the basic profile of the part. I’d like a nice generous fillet in the corner for strength, so I’ve ground quite a large radius on the cutting tool. a lot of cutter contact when it’s right in the corner, but a shallow depth of cut It means there’s made the chatter quite manageable.
    04:24 Then I set the compound over to 15 degrees to cut the flanks of the groove. I’ve ground this narrow, blunt nosed cutting tool to do the cutting. It can cut on both sides of the tool, which is going to be handy in this case, to get a matching surface at the bottom of the pulley groove.
    05:43 The facing cuts didn’t quite get to the arbor, so there’s a small burr at each end of the hole to take care of. I used this hand held countersink to knock them off. So with the profile complete, it’s time to sort out the keyway.
    06:37 I started by feeding in 2 thousandths with each pass to begin with, but as the cut became more established, I had to reduce that to a half thou per cut, and make 3 passes at each depth. I found that any more than that put too much strain on the carriage wheel.
    07:11 The cutting action is not unlike that of a
    shaper; it makes similar looking chips. And it generates quite a clean cut. So with the keyway finished, the pulley is almost complete; It just needs a quick trip to the mill to drill and tap a hole for a set screw.

    References:
    MACHINE SHOP TIPS #151 Cutting a Keyway on the Lathe – a new ”abroach” tubalcain

    Machining A Replacement Pulley With A Keyway, by Clickspring.



    https://www.pinetoken.com/products/magic-grip-socket?variant=35227813709

    A universal socket grips any shape, 54 steel pins automatically adjust to grip hex nuts, wing nuts, square nuts, and especially broken or rusted nuts.

    Product’s detail:
    - Minimum grip size: 7mm (1/4″)
    - Maximum grip size: 19 mm (3/4”)
    - Maximum depth: 9,5 mm
    - Outer Diameter: 25,4 mm
    - Max torque: 150 ft.lbs.
    - Packing: One (1) socket and one (1) drill adapter

    Professional grade universal socket wrench
    Replaces both metric and standard sockets and wrenches
    Unique design automatically adjusts to any size or shape
    Includes power adapter for electric drill or screwdriver

    Related Products