18 Years Factory offer ASTM A563 Grade C Heavy Hex Nuts for Mozambique Importers

Flanged Weld Test Tools enable hydrostatic pressure testing of new flange welds. Use of the tool minimises the test system limits and reduces the time required to undertake the maintenance or modification work. The tools are designed with a single seal and flange configuration and are available in a range of sizes compatible with common pipe schedules and flange types / sizes.

STATS comprehensive range of ancillary equipment is available on a rental basis to support our range of Hydrostatic Weld Test Tools. We can also supply competent Field Technicians to provide operators a full turnkey testing package, delivering a first class maintenance solution for their assets.

For more information visit – https://www.statsgroup.com/

The K2 Storm Snow Plow

https://www.realtruck.com/k2-snow-plows/

is designed for SUVs and light duty trucks featuring a wired controller to raise and lower the blade.
Can be manually adjusted and locked into three different angling positions. Easy to assemble with common hand tools, and only take about an hour to put together and install. Come with Snow deflector, skid shoes, & blade markers
Come with a 1 year warranty.

Stay Informed and Sign Up:

https://www.realtruck.com/newsletter-signup/

Subscribe to our Channel: https://www.youtube.com/user/RealTruckCom

Follow us on Facebook: https://www.realtruck.com/facebook/?ut…
Follow us on Twitter: https://www.realtruck.com/twitter/?utm…
Follow us on Google+: https://www.realtruck.com/gplus/?utm_c…

FREE SHIPPING

Give us a call at 866-262-3738

Video Transcription:
Hey guys. John here with RealTruck.com. Today I’m going to show you how to assemble the K2 Storm snow plow.
We’ve got everything out of the box and laid out so we can put our K2 Storm together. As you can see here, it comes with everything you need to get this thing installed and go to put onto your vehicle. Now, the first step of the procedure for putting together a plow are to take the bolts, washers, and the lock nuts that come with it, which you will find attached to the end of one of the plow halves. So we’re going to put the plow halves together. And make sure guys when you put this together that you get it lined up so that you don’t have one side down because your neighbors would all laugh at you because that’d look pretty silly.
Now that we’ve got our two halves put together, the next thing we’re going do is we’re going to attach our scrapers. As you can see, they come with the bolts already in them so you don’t have to be looking around trying to find where the bolts are. Now when we put these on, make sure that you put these on with these facing out to the front and your nuts going towards the back. So that way they don’t get packed up with snow and ice. You can see, there’s three pieces. Two of them are short ones like this one and then you have a long one. The long one, you want to center over the two halves, just like so. And then the short ones will go on each end.
The next thing we’re going to do is, we’re going to install the plates for our skid shoes. And they install right here on the bottom side of your plow on the back. What you’re going to do is, you’re just going to attach them so that they sit like this. So, you can see how this is shaped at an angle. You want that angle up so that way when your plow is sitting then these skid shoes, when they go on, will set level with the plow.
We can go ahead and put our skid shoes on. Just going to put those on here. And what you want to do when you attach these, is make sure that you set them because they are adjustable. They set them so that the bottom cutting edge of the blade is about a half an inch off the ground. We’ve got our skid shoes onto our blade. The next thing we’re going to do is attach our D-brace to our A-brace. And what we want to do when we do that is make sure that we attach this the right direction, otherwise you’ll have to end up taking it all apart and start it over.