Quality Inspection for ASTM A325M 8S Heavy Hex Structural Bolts for Colombia Factory
Short Description:
ASTM A325M 8S Metric Size Heavy Hex Structural Bolts The bolts are intended for use in structural connections. These connections are covered under the requirements of the Specification for Structural Joints Using ASTM A325 Bolts, approved by the Research Council on Structural Connections, endorsed by the American Institute of Steel Construction and by the Industrial Fastener Institute. Dimension: ASME/ANSI B18.2.3.7M Thread Size: M12-M36 with various length Grade: ASTM A325M Type-1 Grade Ma...
Product Detail
Product Tags
Quality Inspection for ASTM A325M 8S Heavy Hex Structural Bolts for Colombia Factory Detail:
ASTM A325M 8S Metric Size Heavy Hex Structural Bolts
The bolts are intended for use in structural connections. These connections are covered under the requirements of the Specification for Structural Joints Using ASTM A325 Bolts, approved by the Research Council on Structural Connections, endorsed by the American Institute of Steel Construction and by the Industrial Fastener Institute.
Dimension: ASME/ANSI B18.2.3.7M
Thread Size: M12-M36 with various length
Grade: ASTM A325M Type-1
Grade Marking: A325M 8S
Finish: Black Oxide, Zinc Plating, Hot Dip Galvanized, Dacromet, and so on
Packing: Bulk about 25 kgs each carton, 36 cartons each pallet
Advantage: High Quality and Strict Quality Control, Competitive price,Timely delivery; Technical support, Supply Test Reports
Please feel free to contact us for more details.
Product detail pictures:
We normally think and practice corresponding towards the change of circumstance, and grow up. We aim at the achievement of a richer mind and body plus the living for Quality Inspection for ASTM A325M 8S Heavy Hex Structural Bolts for Colombia Factory, The product will supply to all over the world, such as: Cyprus, Algeria, Brazil, We attained ISO9001 which provides solid foundation for our further development. Persisting in High quality, Prompt Delivery, Competitive Price, we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments. It is our great honor to meet your demands. We are sincerely expecting your attention.
Reasons why anchor bolts fail:
-Improperly Designed Anchor Bolts
-Wrong Metallurgy
-Insufficient Embedment Depth
-Misalignment
-Bolts Improperly Maintained
-Sever Dynamic and Cyclic Loads
-Inadequate vertical reinforcement of the concrete around the anchor bolt
-Bolt Sleeves filled with grout, therefore no available free length for proper stretch
-Bolt Sleeves filled with water, which allows for corrosion to take place
-Anchor Bolts do not line up with bolt holes in baseplate
For more grouting information visit https://www.techmargrout.com/
For a guide on how to grout Rotating Equipment visit https://www.techmargrout.com/technical/
Ask about live grout training (much more exciting and modern than these videos) or consulting! Info at https://www.techmargrout.com/services/
Purchase Adjustment Screw: https://www.Taylor-Tactical-Supply.com
Add me to your Google+ Circles:https://plus.google.com/+nictaylor00/posts
Please join me on Facebook for additional pictures:
FaceBook – https://www.facebook.com/NicTaylor00
Twitter – https://twitter.com/nictaylor00
INSTRUCTIONS:
1. The internal set screw comes with thread locker pre-applied but for best results remove the internal screw and apply additional thread locker and re install the set screw inside the
large screw. Make sure to screw down the internal screw all the way in so that the tip just protrudes.
2. Remove the factory grip screw and lock washer from the grip of your rifle. Mind the spring and detent for the safety as they may bounce out if you remove the grip completely.
3. With the hammer cocked and the gun on safe, insert the Trigger Adjustment Screw into the grip and tighten the large screw with a 3/16” hex wrench until he pistol grip is secure.
4. Using the included hex wrench, finger tighten the internal screw inside the 3/16” screw until the it stops. DO NOT OVER TIGHTEN. Backout the internal screw 1/4 turn at a time
until the safety lever can by actuated. Verify that the trigger, disconnector, hammer and safety function correctly. Let your additional thread locker dry before putting your rifle to use.
Music by TeknoAXE, “Cover Blown” https://youtu.be/Kjai-kvSvH4
