System HR Structural Bolts Price - ASTM A325 Heavy Hex Structural Bolts – Dingshen Metalworks
Short Description:
ASTM A325 / A325M Heavy Hex Structural Bolts The bolts are intended for use in structural connections. These connections are covered under the requirements of the Specification for Structural Joints Using ASTM A325 Bolts, approved by the Research Council on Structural Connections, endorsed by the American Institute of Steel Construction and by the Industrial Fastener Institute. Dimension: ASME B18.2.6 (Inch Size), ASME B18.2.3.7M (Metric Size) Thread Size: 1/2″-1.1/2″, M12-M36, ...
Product Detail
Product Tags
System HR Structural Bolts Price - ASTM A325 Heavy Hex Structural Bolts – Dingshen Metalworks Detail:
ASTM A325 / A325M Heavy Hex Structural Bolts
The bolts are intended for use in structural connections. These connections are covered under the requirements of the Specification for Structural Joints Using ASTM A325 Bolts, approved by the Research Council on Structural Connections, endorsed by the American Institute of Steel Construction and by the Industrial Fastener Institute.
Dimension: ASME B18.2.6 (Inch Size), ASME B18.2.3.7M (Metric Size)
Thread Size: 1/2″-1.1/2″, M12-M36, with various lengths
Grade: ASTM A325 / A325M Type-1
Finish: Black Oxide, Zinc Plating, Hot Dip Galvanized, Dacromet, and so on
Packing: Bulk about 25 kgs each carton, 36 cartons each pallet
Advantage: High Quality and Strict Quality Control, Competitive price,Timely delivery; Technical support, Supply Test Reports
Please feel free to contact us for more details.
In 2016, ASTM A325 was officially withdrawn and replaced by ASTM F3125, in which A325 now becomes a grade under the F3125 specification. The F3125 specification is a consolidation and replacement of six ASTM standards, including; A325, A325M, A490, A490M, F1852, and F2280.
Prior to its withdrawl in 2016, the ASTM A325 specification covered high strength heavy hex structural bolts from 1/2″ diameter through 1-1/2″ diameter. These bolts are intended for use in structural connections and therefore have shorter thread lengths than standard hex bolts.
This specification is applicable to heavy hex structural bolts only. For bolts of other configurations and thread lengths with similar mechanical properties, see Specification A449.
Bolts for general applications, including anchor bolts, are covered by Specification A449. Also refer to Specification A449 for quenched and tempered steel bolts and studs with diameters greater than 1-1/2″ but with similar mechanical properties.
Product detail pictures:
The consumer fulfillment is our primary goal. We uphold a consistent level of professionalism, top quality, credibility and service for System HR Structural Bolts Price - ASTM A325 Heavy Hex Structural Bolts – Dingshen Metalworks, The product will supply to all over the world, such as: Lisbon, Iraq, France, To meet the requirements of individual customers for each bit more perfect service and stable quality products. We warmly welcome customers around the world to visit us, with our multi-faceted cooperation, and jointly develop new markets, create a brilliant future!
Visit https://www.thesmallengineshop.net
**Always follow the instructions in your repair manual when doing repair or maintenance work on Outdoor Power Equipment. Manuals can be found at the manufacturers website.**
This Craftsman GT5000 Garden Tractor has a hydrostatic transmission with hand control. When the transmission is moved forward, and than put back into neutral it continues to creep forward. Fixing the problem involves adjusting the control arm by loosening a adjusting bolt which is located underneath the right fender and connected to the control arm. To get access to the adjustment bolt, remove the right rear tire. I was able to jack up the rear of the tractor and start it, so I could test the tractor while the rear of the tractor was off the ground. The adjustment requires very small movements until the right position is found. You will know when it is adjusted correctly when the tractor rear wheels do not turn with the transmission is put in neutral from forward and reverse position.
website:https://www.jhmindustry.com/
Shanghai Jian & Mei Industry and Trade Co., Ltd. is the company which manufacture and export fasteners and metal hardware, founded in 2006, with import-export authority. Now, 80% products export to all over the world and 20% sell in domestic market.
