ASTM A563 DH Heavy Hex Nuts

ASTM A563 DH Heavy Hex Nuts

Short Description:

ASTM A563 DH Heavy Hex Nuts Dimension Standard: ASME B18.2.2 Inch Size: 1/4”-4” Other Available Material Grade: ASTM A563 A, B, C, D, DH and so on. Finish: Plain, Black Oxide, Zinc Plated, Hot Dipped Galvanized, etc. Packing: Bulk about 25 kgs each carton, 36 cartons each pallet Advantage: High Quality, Competitive Price, Timely Delivery,Technical Support, Supply Test Reports Please feel free to contact us for more details. ASTM A563 The ASTM A563 specification covers the chemical and mechani...


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Port: Ningbo
  • Payment Terms: L/C,D/A,D/P,T/T
  • Product Detail

    Product Tags

    Product Description

    ASTM A563 DH Heavy Hex Nuts

    Dimension Standard: ASME B18.2.2

    Inch Size: 1/4”-4”

    Other Available Material Grade:

    ASTM A563 A, B, C, D, DH and so on.

    Finish: Plain, Black Oxide, Zinc Plated, Hot Dipped Galvanized, etc.

    Packing: Bulk about 25 kgs each carton, 36 cartons each pallet

    Advantage: High Quality, Competitive Price, Timely Delivery,Technical Support, Supply Test Reports

    Please feel free to contact us for more details.

    Product Standards

    ASTM A563

    The ASTM A563 specification covers the chemical and mechanical requirements for carbon and alloy steel nuts used on bolts, studs, and externally threaded fasteners. The charts below address over tapping allowances for hot-dip galvanized nuts, grade marking requirements, and mechanical requirements.

    According to the A563 specification, “The requirements for any grade of nut may, at the supplier’s option, and with notice to the purchaser, be fulfilled by furnishing nuts of one of the stronger grades specified herein unless such a substitution is barred in the inquiry and purchase order”. This is important because some nut grades are not readily available in certain sizes and finishes. Additionally, the specification allows for the substitution of ASTM A194 grade 2H nuts in lieu of A563 grade DH nuts due to the lack of availability of grade DH nuts in nominal sizes 3/4″ and larger.

    Hot-dip galvanized nuts must be tapped oversize to allow for the added thickness of the zinc on the threads of the externally threaded fastener. These allowances are addressed in the chart below.

    Various nut styles exist and to some degree are determined by their grade. These styles include hex, heavy hex, square, jam, coupling, and sleeve.

    A563 Grades

    A Carbon steel, hex or heavy hex
    B Carbon steel, hex or heavy hex
    C Carbon steel, quenched and tempered, heavy hex
    D Carbon steel, quenched and tempered, heavy hex
    DH Carbon steel, quenched and tempered, heavy hex
    C3 Weathering steel, quenched and tempered, heavy hex
    DH3 Weathering steel, quenched and tempered, heavy hex

    A563 Mechanical Properties

    Grade Style Size, in. Proof Load, ksi Hardness, HBN
    Plain Galvanized
    A Hex 1/4 - 1-1/2 90 68 116 - 302
    Heavy Hex 1/4 - 4 100 75 116 - 302
    B Heavy Hex 1/4 - 1 133 100 121 - 302
    Heavy Hex 1-1/8 - 1-1/2 116 87 121 - 302
    C / C3 Heavy Hex 1/4 - 4 144 144 143 - 352
    D Heavy Hex 1/4 - 4 150 150 248 - 352
    DH / DH3 Heavy Hex 1/4 - 4 175 150 248 - 352
    For UNC, 8UN, 6UN, and Coarse Pitch Threads

    A563 Chemical Properties

    Element Grades O, A, B, C D** DH**
    Carbon 0.55% max 0.55% max 0.20 - 0.55%
    Manganese, min   0.30% 0.60%
    Phosphorus, max 0.12% 0.04% 0.04%
    Sulfur, max 0.15%* 0.05% 0.05%
    * For grades O, A and B a sulfur content of 0.23% max is acceptable with the purchasers approval
    ** For grades D and DH a sulfur content of 0.05 - 0.15% is acceptable provided the manganese is 1.35% min
    Element Classes for Grade C3* DH3
    A B C D E F N
    Carbon 0.33 - 0.40% 0.38 - 0.48% 0.15 - 0.25% 0.15 - 0.25% 0.20 - 0.25% 0.20 - 0.25%   0.20 - 0.53%
    Manganese 0.90 - 1.20% 0.70 - 0.90% 0.80 - 1.35% 0.40 - 1.20% 0.60 - 1.00% 0.90 - 1.20%   0.40% min
    Phosphorus 0.040% max 0.06 - 0.12% 0.035% max 0.040% max 0.040% max 0.040% max 0.07 - 0.15% 0.046% max
    Sulfur, max 0.050% 0.050% 0.040% 0.050% 0.040% 0.040% 0.050% 0.050%
    Silicon 0.15 - 0.35% 0.30 - 0.50% 0.15 - 0.35% 0.25 - 0.50% 0.15 - 0.35% 0.15 - 0.35% 0.20 - 0.90%  
    Copper 0.25 - 0.45% 0.20 - 0.40% 0.20 - 0.50% 0.30 - 0.50% 0.30 - 0.60% 0.20 - 0.40% 0.25 - 0.55% 0.20% min
    Nickel 0.25 - 0.45% 0.50 - 0.80% 0.25 - 0.50% 0.50 - 0.80% 0.30 - 0.60% 0.20 - 0.40% 1.00% max 0.20% min**
    Chromium 0.45 - 0.65% 0.50 - 0.75% 0.30 - 0.50% 0.50 - 1.00% 0.60 - 0.90% 0.45 - 0.65% 0.30 - 1.25% 0.45% min
    Vanadium     0.020% min          
    Molybdenum   0.06% max   0.10% max       0.15% min**
    Titanium       0.05% max        
    * Selection of a class shall be at the option of the manufacturer
    ** Nickel or Molybdenum may be used.

    A563 Grade Identification Markings

    Grade Identification Marking Specification Material Nominal Size, In. Proof Load Stress, ksi Hardness Rockwell See Note
    Min Max
    no_mark ASTM A563 Grade O Carbon Steel 1/4 - 1-1/2 69 B55 C32 2,3
    ASTM A563 Grade A Carbon Steel 1/4 - 1-1/2 90 B68 C32 2,3
    ASTM A563 Grade B Carbon Steel 1/4 - 1 120 B69 C32 2,3
    >1 - 1-1/2 105
    C ASTM A563 Grade C Carbon Steel, may be Quenched and Tempered 1/4 - 4 144 B78 C38 4
    C3 ASTM A563 Grade C3 Atmospheric Corrosion Resistant Steel, may be Quenched and Tempered 1/4 - 4 144 B78 38 4,6
    D ASTM A563 Grade D Carbon Steel, may be Quenched and Tempered 1/4 - 4 150 B84 C38 5
    DH ASTM A563 Grade DH Carbon Steel, Quenched and Tempered 1/4 - 4 175 C24 C38 5
    DH3 ASTM A563 Grade DH3 Atmospheric Corrosion Resistant Steel, Quenched and Tempered 1/4 - 4 175 C24 C38 4,6

    NOTES:

        1.In addition to the indicated grade marking, all grades, except A563 grades O, A, and B, must be marked for manufacturer identification.

        2.Nuts are not required to be marked unless specified by the purchaser. When marked, the identification marking shall be the grade letter O, A, or B.

        3.Properties shown are those of nonplated or noncoated coarse thread nuts.

        4.Properties shown are those of coarse thread heavy hex nuts.

        5.Properties shown are those of coarse thread heavy hex nuts. Other nuts styles and fine threads may apply.

        6.The nut manufacturer, at his option, may add other markings to indicate the use of atmospheric corrosion resistant steel.

    Inch Fastener Standards. 7th ed. Cleveland: Industrial Fasteners Institute, 2003. n-80-n-81.

    Thread Dimensions and Oversizing Allowances

    For Nuts: Hot Dipped Galvanized per Specification F2329

    Nominal Nut Size, in. and Pitch Diametral Allowance, in. Pitch Diameter
    Min Max
    0.250 - 20 0.016 0.2335 0.2384
    0.312 - 18 0.017 0.2934 0.2987
    0.375 - 16 0.017 0.3514 0.3571
    0.437 - 14 0.018 0.4091 0.4152
    0.500 - 13 0.018 0.4680 0.4745
    0.562 - 12 0.020 0.5284 0.5352
    0.625 - 11 0.020 0.5860 0.5932
    0.750 - 10 0.020 0.7050 0.7127
    0.875 - 9 0.022 0.8248 0.8330
    1.000 - 8 0.024 0.9428 0.9516
    1.125 - 8 0.024 1.0678 1.0768
    1.125 - 7 0.024 1.0562 1.0656
    1.250 - 8 0.024 1.1928 1.2020
    1.250 - 7 0.024 1.1812 1.1908
    1.375 - 8 0.027 1.3208 1.3301
    1.375 - 6 0.027 1.2937 1.3041
    1.500 - 8 0.027 1.4458 1.4553
    1.500 - 6 0.027 1.4187 1.4292
    1.750 - 5 0.050 1.6701 1.6817
    2.000 - 4.5 0.050 1.9057 1.9181
    2.250 - 4.5 0.050 2.1557 2.1683
    2.500 - 4 0.050 2.3876 2.4011
    2.750 - 4 0.050 2.6376 2.6513
    3.000 - 4 0.050 2.8876 2.9015
    3.250 - 4 0.050 3.1376 3.1517
    3.500 - 4 0.050 3.3876 3.4019
    3.750 - 4 0.050 3.6376 3.6521
    4.000 - 4 0.050 3.8876 3.9023
    Inch Fastener Standards. 7th ed. Cleveland: Industrial Fasteners Institute, 2003. B-173.

    Product Certificates

    1
    2
    3
    4
    A325M Test Report
    A563M 10S Test Report

    About us

    Testing Lab

    1. Strength Testing Facility
    2. Impact Testing Facility
    3. Hardness Testing Facility
    5. Metallographic Analysis Facility

    Workshop

    1 Annealing Furnace
    2 Cold Forging Line
    3 Hot Forging Line
    4 Heat Treatment line
    5 Heat Treatment Line
    6 Thread Rolling  Line
    7 Thread Rolling  Line
    8 Thread Rolling  Line
    9 CNC Lathe Workshop
    10 CNC Machining Center

    Warehouse

    3 Carton and Pallet
    5 Threaded Rod Packing
    2 Metal Keg and Pallet
    6 Threaded Rod Packing
    4 Threaded Rod Packing
    1 Stock Shelf

  • Previous:
  • Next:

  • Related Products