SAE J995 Grade 2, 5, 8 Finished Hex Nuts
Inkcazelo emfutshane:
SAE J995 Grade 2, 5, 8 Hex Nuts Dimension Standard Standard: ASME B18.2.2 Ulungelelwaniso olwahlukeneyo luyafumaneka. Ubungakanani be-intshi: 1/4 "-1.1 / 2" Gqiba: I-Plain, i-Oxide emnyama, i-Zinc Plated, i-Hot Dipped Galvanized, njl. Ukupakisha: Ubuninzi malunga ne-25 kgs ibhokisi ngalinye, iibhokisi ze-36 kwi-pallet nganye I-Advantage: Umgangatho ophezulu, ixabiso loKhuphiswano, ngexesha elifanelekileyo. Ukuhanjiswa,iNkxaso yobuGcisa, iiNgxelo zoVavanyo lokuNikezela Nceda uzive ukhululekile ukuqhagamshelana nathi ngeenkcukacha ezithe vetshe. I-SAE J995 SAE J995 ibandakanya iimfuno zoomatshini kunye neekhemikhali zothotho lwee-intshi ...
Iinkcukacha zeMveliso
Iithegi zeMveliso
SAE J995 Grade 2, 5, 8 Finished Hex Nuts
Umgangatho woMda: ASME B18.2.2
Uqwalaselo olwahlukeneyo luyafumaneka.
Ubungakanani be-intshi: 1/4 "-1.1/2"
Gqiba: I-Plain, i-Oxide emnyama, i-Zinc ePlated, i-Hot Dipped Galvanized, njl.
Ukupakisha: Ubuninzi malunga ne-25 kgs ibhokisi ngalinye, iibhokisi ze-36 pallet nganye
I-advanteji: Umgangatho ophezulu, ixabiso loKhuphiswano, ukuhanjiswa kwangexesha, iNkxaso yobuGcisa, iiNgxelo zoVavanyo loBonelelo
Nceda uzive ukhululekile ukuqhagamshelana nathi ngeenkcukacha ezithe vetshe.
SAE J995
I-SAE J995 ibandakanya iimfuno zoomatshini kunye neekhemikhali ze-inch series nuts kumabakala amathathu asetyenziswa kwiimoto kunye namashishini anxulumeneyo ngokobukhulu ukuya kwi-1-1 / 2 "ngokubandakanya. I-SAE J995 yamaBanga 2, 5, kunye ne-8 amandongomane afumaneka ngokulula kwipatheni eqhelekileyo ye-hex.
Iipropati ze-J995 zoomatshini
| IBanga | Ubungakanani begama, i-intshi | I-Proofload, i-UNC kunye ne-UN 8 Imisonto, i-psi | Ubunzima beRockwell |
|---|---|---|---|
| 2 | 1/4 ukuya ku-1-1/2 | 90,000 | C32 Max |
| 5 | 1/4 ukuya ku-1 | 120,000 | C32 Max |
| Ngaphezulu kwe-1 ukuya kwi-1-1/2 | 105,000 | C32 Max | |
| 8 | 1/4 ukuya ku-5/8 | 150,000 | C24-C32 |
| Ngaphezulu kwe5/8 ukuya ku-1 | 150,000 | C26-C34 | |
| Ngaphezulu kwe-1 ukuya kwi-1-1/2 | 150,000 | C26-C36 | |
| *Amaxabiso adwelisiweyo akaqheleki ukusebenza kwijam, slotted, castle, heavy or thick nuts. | |||
IiMfuno zeMichiza ye-J995
| IBanga | Ikhabhoni, % | Iphosphorus, % | IManganese,% | Isulfure, % |
|---|---|---|---|---|
| 2 | 0.47 ubuninzi | 0.120 ubuninzi | - | 0.15 ubuninzi |
| 5 | 0.55 ubuninzi | 0.050 ubuninzi | 0.30 imiz | 0.15 ubuninzi |
| 8 | 0.55 ubuninzi | 0.040 ubuninzi | 0.30 imiz | 0.05 ubuninzi |
Indawo yoxinzelelo lweJ995
| Umsonto, UNC | Indawo yoxinzelelo lwe-UNC, i-intshi ezikwere | Umsonto, 8TPI | Indawo ye-TPI yoxinzelelo lwe-8, i-intshi ezikwere |
|---|---|---|---|
| 1/2-13 | 0.1419 | ||
| 5/8-11 | 0.226 | ||
| 3/4-10 | 0.334 | ||
| 7/8-9 | 0.462 | ||
| 1-8 | 0.606 | 1-8 | 0.606 |
| 1-1/8-7 | 0.763 | 1-1/8-8 | 0.790 |
| 1-1/4-7 | 0.969 | 1-1/4-8 | 1.000 |
| 1-3/8-6 | 1.155 | 1-3/8-8 | 1.233 |
| 1-1/2-6 | 1.405 | 1-1/2-8 | 1.492 |
| Ukubala ixabiso le-nut proofload, phinda-phinda indawo yoxinzelelo lwe-tensile ngexabiso elifanelekileyo lovavanyo lwe-psi. | |||
ILebhu yoVavanyo
Iworkshop
Indawo yokugcina impahla
