ASTM A325 Swaar Hex strukturele Bolts

ASTM A325 Swaar Hex strukturele Bolts

Kort beskrywing:

ASTM A325 / A325M Heavy Hex Structural Bolts The bolts are intended for use in structural connections. These connections are covered under the requirements of the Specification for Structural Joints Using ASTM A325 Bolts, approved by the Research Council on Structural Connections, endorsed by the American Institute of Steel Construction and by the Industrial Fastener Institute. Dimension: ASME B18.2.6 (Inch Size),  ASME B18.2.3.7M (Metric Size) Thread Size: 1/2″-1.1/2″,  M12-M36, ...


  • FOB Prys: VSA $ 0,5 - 9999 / stuk
  • Min.Order Hoeveelheid: 100 Stuk / Stukke
  • Verskaf Vermoë: 10.000 Stuk / stukke per maand
  • Port: Ningbo
  • Betaalvoorwaardes: L / C, D / A, D / P, T / T
  • produk Detail

    produk Tags

    ASTM A325 / A325M Heavy Hex Structural Bolts

    Die boute is bedoel vir gebruik in strukturele verbindings. Hierdie verbindings word gedek onder die vereistes van die spesifikasie vir strukturele Gewrigte Gebruik ASTM A325 Bolts, deur die Raad Navorsing goedgekeur op strukturele verbindings, deur die Amerikaanse Instituut van Staalkonstruksie en deur die Industrial Hegting Instituut onderskryf.

    Dimension: ASME B18.2.6 (Inch Size),  ASME B18.2.3.7M (Metric Size)

    Thread Size: 1/2″-1.1/2″,  M12-M36, with various lengths

    Grade: ASTM A325 / A325M Type-1

    Afwerking: Swart-oksied, sink plate, warm verzinkt, Dacromet, en so aan

    Verpakking: Bulk sowat 25 kg elk karton, 36 kartonne elke palet

    Voordeel: hoë kwaliteit en streng kwaliteitskontrole, kompeterende prys, tydige aflewering; Tegniese ondersteuning, Verskaf toetsverslae

    Voel asseblief vry om ons te kontak vir meer besonderhede.

    In 2016, ASTM A325 was officially withdrawn and replaced by ASTM F3125, in which A325 now becomes a grade under the F3125 specification.  The F3125 specification is a consolidation and replacement of six ASTM standards, including; A325, A325M, A490, A490M, F1852, and F2280. 

    Prior to its withdrawl in 2016, the ASTM A325 specification covered high strength heavy hex structural bolts from 1/2″ diameter through 1-1/2″ diameter. These bolts are intended for use in structural connections and therefore have shorter thread lengths than standard hex bolts. 

    This specification is applicable to heavy hex structural bolts only. For bolts of other configurations and thread lengths with similar mechanical properties, see Specification A449.

    Bolts for general applications, including anchor bolts, are covered by Specification A449. Also refer to Specification A449 for quenched and tempered steel bolts and studs with diameters greater than 1-1/2″ but with similar mechanical properties.

     

     

     


  • Vorige:
  • volgende:

  • Verwante Produkte